Technology And Computer|

However advanced the technology may be and whatever precautions we may take, data loss is almost inevitable. Though Linux operating system is often improved upon its previous versions than any of its counterparts, still there are a number of reasons, for which data can be lost in a Linux operating system based computer. In a Linux computer, the fstab (/etc/fstab) and mtab (/etc/fstab) are the two most crucial directories. Without these directories, the operating system could not be able to locate neither the existing hard drive volumes nor the mounted drives on your system. For this reason, the system fails to boot and all your data in the hard drive becomes inaccessible. In such situation of data loss, you need any Linux data recovery software to recover back the lost or inaccessible data.

Facts about ‘fstab’ and ‘mtab’ directories:

• The fstab or ‘file systems table’ is a system directory within the Linux operating system. This system configuration file contains information about all the available hard drives and volumes attached to the system. The file tells, the way, hard drive volumes are initialized and integrated through the file system. Moreover, it lists the details of the file systems, which are accessed by the ‘fsck command.

• The mtab or ‘mounted file systems table’ is also part of system configuration and lists all the currently mounted file systems on your Linux system. The file retains every detail of the mounted volumes, that is whether mounted manually or automatically and is automatically updated once the mount command is triggered against any drive or volume.

Sometimes, while accessing the Linux drives or the mounted volumes you may come across error messages related to the mounted file system and all the files and directories become inaccessible. The error message that you may have encountered can be read as below:

“Cannot read table of mounted file systems”

The above error is caused due to the corruption of ‘fstab’ or ‘mtab’ directories. Thus, the file system fails to mount and the data remains inaccessible thereof.

Such situation of data loss can only be dealt by any efficient Linux data recovery utility. These applications are meant to recover the lost, deleted, formatted or inaccessible data from the Linux file system based volumes. Moreover, these helpful utilities are completely safe to use and come with detailed instructions, so that can be used without any prior knowledge.

Incoming search terms for the article:

• about fstab & mstab in linux (1)
• redhat filesystem in mtab but not mounted (1)

In Linux operating system, you should arrange to mount root file system as read-only to start with at boot time. If required then remount the file system in read/write mode. Most of the Linux distributions follow this process. If your operating system does not do this, you must read the documentation and then find out how to set your file system to follow this process.

You are required to specify -n option to mount the file system so that it does not try to update the /etc/mtab directory, otherwise the file system will fail and you will not be able to access data from it. It might cause data loss in some situations and require Linux Data Recovery to be sorted out. When a file system failure occurs on Linux file system, you generally encounters following error messages, which may stop the functionality of your system:

“EXT2-fs warning: maximal count reached.” This error message is caused by Linux operating system kernel when it mounts the file system, which is marked as clean but the number of mounts since check has reached predefined value. It might sometimes cause file system corruption and put you in need of Data Recovery Linux. The possible solution to resolve this problem is to install latest version of ext2fs utilities. You can check maximum number of counts by using tune2fs utility. “Cannot read table of mounted file systems.” You encounter this problem when the file system data structures like /etc/mtab or /etc/fstab gets damaged. If you’ve a new version of mount, then you should empty or delete the /etc/mtab file during boot. When these data structures get damaged, file system corruption occurs and you come across significant data loss circumstances.

In order to sort out the file system corruption problem, you are required to format the hard drive and reinstall operating system. This process will replace your damaged file system with new one and make your system working. But this process has a downside that it removes all of the data from hard drive and cause complete data loss that requires Data Recovery Linux for retrieving data. Recovery is possible through third-party applications, known as Linux Recovery software. The tools thoroughly scan the affected hard drive retrieve all of the lost data from it. They are completely safe and easy to use.

Stellar Phoenix Linux Data Recovery is the best ever made and the most advanced application that handles all types of data loss situations. It is compatible with most major distributions of Linux including Debian, RedHat, SUSE and Fedora. The software supports recovery from Ext4, Ext3, Ext2 and ReiserFS file system volumes.

Incoming search terms for the article:

• failure of file systems cause (1)

Are you resizing your Linux hard drive partitions using Gparted utility? Create an absolute backup of your valuable data before your proceed. Gparted provides you advanced and easy methods to perform a number of operations on your Linux volumes. However, in some cases, re-sizing the partition with Gparted utility can become very problematic. It may corrupt the volumes and cause critical data loss situations. In order to recover lost data in such circumstances, Linux Data Recovery becomes need of hour.

Gparted is an inbuilt tool in Linux operating system, which enables you to create, resize, deleted, copy, move, or check hard drive partitions, and file systems on partitions. It also creates partition table on hard drive and enables/disables the partition flags like hidden and boot. It is helpful for reorganizing disk usage, creating space for new OS, mirroring one volume with another, and copying the data stored on hard drive.

Sometimes, while resizing the Linux hard drive partitions through Gparted tool, the process may gets terminated with read/write errors. After this alarming incident, hard drive doesn’t mount at all and gives you further errors.

At this point, if you run the fsck utility after restarting the problem remains intact. Furthermore, you encounter further error messages. The situations keep getting more and more serious at every attempt of solving this problem. Linux superblock may get damaged, and give you the indication of file system corruption.

The problem can be indicated by various error messages, such as:

“Superblock corrupted, run with -b 32768″

Some warning messages may also occur, which indicates the the device is busy and it cannot be accessed.

Redundant copies of the superblock are maintained by Linux file system. You can fix this issue by using any of such copies. You can search alternative superblock using “mkfs -n” command.

However, if you cannot find a superblock that is free from corruption, you need to format the hard drive and reinstall operating system. Although, this method can fix up the problem, but also removes all the data from hard drive and creates need of Data Recovery Linux.

You can recover Linux data with the help of third-party Linux Data Recovery software. The applications enable you to perform Linux Recovery on your own as they have simple graphical user interface.

Stellar Phoenix Linux Data Recovery is the most advanced and widely used application to perform absolute recovery of lost Linux data. It works well with all major distributions of Linux operating system, such as Red Hat, Debian, SUSE, Fedora, and Ubuntu. The software recovers lost data from Ext4, Ext3, Ext2, FAT32, VFAT, FAT16, and FAT12 file system volumes.

Like other computer operating systems, Linux also indicates system problems in the form of error messages. The problems may occur at startup or while working on your system. In some error messages, the actual cause of the problem and possible solution is provided. However, some errors do not contain any suggestions. They just include some codes.

The error messages generally occur due to problems with system data structures, system files, and other resources, which make your system and data inaccessible. This behavior leads to significant data loss from your Linux hard drive and requires Data Recovery Linux to be sorted out.

In a practical scenario, you may come across the below error message while working on your Linux machine:

“Make Says, Error 139″

After the above error, Linux system does not work properly and shuts down. The problem occurs every time when you boot your system or perform a specific set of operations. This error renders your system inaccessible and causes serious data loss. In order to get your business-critical data recovered, identify the cause of this problem and perform Linux Data Recovery by resolving it.

Root of the problem

This error occurs when your compiler dumps the core. You have a damaged, old, or buggy version of the GCC (GNU Compiler Collection). The compiler corruption may occur due to numerous reasons, such as unexpected system shutdown, operating system malfunction, virus infection, file system corruption, and more.

You may also face this situations due to problems with the disk or memory corruption. The disk corruption is resulted when metadata structure of the hard drive become faulty. In such cases, operating system can not locate and access data from the hard drive.

Resolution

Go through any of the below steps to sort out this issue:

•    Install latest release of Linux compiler or EGCS (Experimental/Enhanced GNU Compiler System).

•    Check wait states, clock rate, and the refresh timing for SIMMS and cache. Use fsck command-line utility to scan the disk and fix errors.

•    Use powerful and advanced third-party Linux Recovery software to recover lost, missing, deleted, and inaccessible data from Linux hard drive.

Linux Data Recovery tools employ high-end scanning techniques to methodically scan whole hard drive and extract all data from it. With simple user interface and read-only behavior, they perform easy and safe recovery in all cases of data loss.

Stellar Phoenix Linux Data Recovery software recovers lost data from Linux hard drive, USB drive, and network mapped drive. The software works well with all major distributions of Linux operating system, including Red Hat, SUSE, Debian, Ubuntu, and Mandriva. It supports recovery from Ext4, Ext3, Ext2, FAT32, FAT16, and FAT12 file system volumes.

Incoming search terms for the article:

• JBD: no valid journal superblock found usbdrive (1)

The Linux operating system is supposed to be the most regularly updated operating system among its counterparts. Apart from this fact, for its advanced technology and features, a large number of users prefer Linux. But, in Linux, the user can not get everything preloaded just like Windows. There is an unique command for each operation in Linux and from the long list of regularly used commands, the ‘mount’ command lets the operating system to learn about the file system and lists in the file system hierarchy of the computer, which lets us access the the particular drives. However, sometimes, the ‘mount’ command fails to work and the OS can not be able to learn the drives resulting in the inaccessibility of them. In such situations of data loss or inaccessibility, Linux data recovery can help you recover your valuable data back.

There can be a possible file system corruption, which has led this abrupt behavior of the Linux system following the failure of the ‘mount’ command. The ‘fsck’ is a built-in command-line utility in Linux operating system, which checks the consistency of the file system and repairs the same, if finds any error. After encountering the above situation, if you try to mount the drives using the ‘fsck’ command, you may encounter some more error messages. The error messages may be read as below:

“[/dev/mapper]fsck -a /dev/mapper/mpath0p1
fsck 1.35 (28-Feb-2004)
ext2fs_check_if_mount: Input/output error while determining whether /dev/mapper/mpath0p1 is mounted.”

OR

“fsck.ext2: Bad magic number in super-block while trying to open /dev/mapper/mpath0p1
/dev/mapper/mpath0p1:
The superblock could not be read or does not describe a correct ext2
file system. If the device is valid and it really contains an ext2
file system (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>”

The above error messages clearly state that the file system has been corrupted. In order to resolve the issue, you need to boot the Linux system from the safe mode and run the ‘fsck’ command to repair the corruption. However, if the file system has been severely corrupted, ‘fsck’ simply exits without doing anything. In such a case, if you are an expert user, you can input the next super-block address or the size of the same to the ‘fsck’ command, which can help the utility to gather the information from the next super-block and do the job.

However, failing to the above resolution method, you need to opt for any Linux drive recovery software to bring back your precious data.

Stellar Phoenix Linux Data Recovery is an efficient as well as 100% risk-free Linux recovery utility of the current time. The utility has been trusted by a number of users for its power-packed scanning algorithms and ability to recover lost, deleted, formatted or inaccessible data from any troubled Linux drive irrespective of the complexity of the data loss situations.

Incoming search terms for the article:

• solution of unmount -a linux (1)

In Linux operating system, you can re-size the hard drive volumes with preservation of your critical data stored on the volume, using Gparted utility. It can also be used for creating, moving and removing hard drive volumes. In some situations, resizing the hard drive volume might cause serious problems of data loss. Unsuccessful operation of disk resizing might render the disk volumes and stored data inaccessible. In these cases, you are required to opt for effective and powerful Linux Data Recovery software to get all of the missing, lost and inaccessible data. In a practical scenario, when you resize the hard drive volumes using Gparted utility in Linux, read/write operation may halt it and the hard drive might not mount.

When you try to access data from the affected hard drive, you come across a number of error messages. In such situations, if you run fsck command to detect and repair errors, it does not detect any problem and you encounter further error messages. The error message can be similar to the following one: At this point, your Linux system does not boot up and thus you can not access the stored data form hard drive. In these circumstances, you need to find out the cause of this issue and go for Data Recovery Linux to retrieve lost data.

Cause of this problem

This issue generally occurs due to corruption to the Superblock. It is one of the most critical database of your Linux operating system. The above error message indicates that your file system is severely damaged and thus the system can not work.

Resolution

The Linux operating system keeps redundant copies of superblock. You can use any of them to sort out the problem. You can search alternative superblock using ‘mkfs -n’ command. If you are unable to replace damaged superblock or the problem is with file system, you can go for hard drive formatting and operating system reinstallation. The process will replace all the damaged system resources and install a clean file system. Though above process can resolve the current problem, but it also has a drawback. Formatting the hard drive removes all of the data from it and cause critical data loss situations.

In these cases, you require Linux Data Recovery to handle the situation. Recovery is best possible using third part Linux Recovery software. The applications use high-end scanning techniques to thoroughly scan the affected drive and retrieve all of the lost, missing and inaccessible data. They are quite easy and safe to use. Stellar Phoenix Linux Data Recovery is the most excellent solution for all your Linux data loss problems. It supports recovery from Ext4, Ext3, Ext2 and ReiserFS file system volumes. The software is compatible with all major Linux distributions including RedHat, Fedora, Debian and Ubuntu.

In Linux operating system, the file system stores all critical information about files located on hard drive. Without file system, operating system can not located and access data from the hard drive as the operating system accesses file system pointer to locate data. Thus, for proper working of your system, the file system should remain free from corruption or any other problems. In the else case, you come across data loss situations and you need to go for Linux Data Recovery to extract data from the drive.

In a practical scenario, while dealing with Ext2 file system of Linux operating system, you may come across below error message:

“EXT2-fs error (device 09:00): ext2_check_descriptors: Block bitmap fo

not in group (block 3670099)!

EXT2-fs: group descriptors corrupted”

After this error message, you can not access data from the drive and your system may possibly can not boot up. In order to fix this issue, you have to find out the its cause and perform Data Recovery Linux by fixing it.

Root of the problem

The Ext2 file system is made of several Block Groups that create block group descriptor, which is responsible for controlling and managing files creation and file access operations. This metadata structure has Block Bitmap, Inode Bitmap, Inode Table, and Super Block like information that are most critical components of Linux file system.

The above error occurs due to corruption to Block Bitmap that works as a map of all the blocks in group. When you run fsck in such situations, you get further error messages that states severe file system corruption and superblock corruption.

Resolution

There are two possible fixes of this problem:

1) Locate and run fsck with alternative metadata structures.

2)Format the hard drive and reinstall operating system to replace damaged file system with new one.

Although, second option is able to sort out all such issues, but also has a downside. It removes all the data from hard drive and cause catastrophic data loss. In such cases, Ext2 Recovery applications are required to handle the situation.

The Linux Data Recovery software are particularly designed to scan the drive using powerful scanning algorithms and extract all lost data from it. They enable you to perform Linux recovery on you own as of rich graphical user interface. The tools preserve integrity of your data due to read-only and non-destructive behavior.

Stellar Phoenix Linux Data Recovery is a robust utility for assured recovery of lost data. The softwre recovers data from Ext4, Ext3, Ext2, FAT32, FAT16, and FAT12 file system volumes. It works well with all major distributions of Linux operating system including Red Hat, SUSE, Debian, and Fedora.

Incoming search terms for the article:

• EXT2-fs: group descriptors corrupted! (2)
• ext2-fs group descriptors corrupted (1)